
ServicesWindow Installation
Window Installation in Buena Park
We install new windows in additions, remodels and openings that need a full-frame install. Each unit goes in level, flashed and sealed, so it opens easily and keeps water out. We treat your home the way we would want a neighbor to treat ours.
When window installation is the right call
Window installation means setting a new window into an opening, not just swapping glass. It fits a room addition, a remodel where the wall has been opened up, or an old frame that is too far gone to build on. In those cases the frame comes out down to the rough opening and a new window goes in from scratch.
If your frames are sound and you only want better glass, our window retrofitting or window replacement pages may suit you better. We will tell you which one your home needs when we look at it.
Most houses around here have stucco walls. Getting a new window into stucco without cracking the finish or leaving a path for winter rain takes patience, and that is where most of the work happens.
What the work includes
Measuring the rough opening
We measure each opening at several points to check for out-of-square framing. The window is ordered to fit what is really there, not what the plans say.
Flashing and water control
Sill pan and flashing go in before the window does. This is the step that keeps water out of the wall for years.
Setting and shimming
Each window is shimmed level and plumb, then fastened. A window set out of square sticks, drafts and wears its locks early.
Sealing inside and out
We fill the gap around the frame with low-expansion foam and seal the exterior. Then we patch the stucco or trim so the edge looks finished.
Permit when needed
Some jobs need a city permit and inspection. When yours does, we pull it and schedule the inspection.
Cleanup
Old frames, packaging and debris leave with us. We vacuum the work area before we go.
Signs you need a new window installed
You are adding a room
An addition or enclosed patio needs windows that match the opening and meet code. We work from the framed opening your builder leaves.
Rot or damage in the frame
If the old frame is soft, cracked or pulling away from the wall, a new window set on top of it will not last. The frame has to come out.
Water stains under the sill
Stains or bubbling paint below a window often mean the flashing failed. Fixing that means taking the window out and doing the flashing right.
A remodel opened the wall
When drywall or stucco is already off, it is the best time to put in a new window properly.
Old aluminum frames that sweat
Single-pane aluminum frames drip with condensation on cool mornings and let summer heat straight through. A new vinyl window with insulated glass fixes both.
How a job day runs
- 1
Free estimate at your home
We come out, measure and look at the framing and walls. You get a written estimate that spells out each window and any extra work. No sales pressure and no obligation.
- 2
Ordering
Windows are made to your measurements. We tell you when they will arrive and set a date that works for you.
- 3
Prep and protection
We lay drop cloths, move what needs moving with you, and cover floors and furniture near each opening.
- 4
Install and seal
Old frames come out, flashing goes in, and each window is set, shimmed and sealed. Most homes are done the same day, larger jobs in two.
- 5
Walkthrough
We open and lock every window with you and show you how the weep holes and screens work. If anything is off, we fix it before we leave.
What moves the cost
Every opening is different, so we price after we see it. Your written estimate shows each line so you know where the money goes. The estimate is free and done at your home, with no sales pressure or obligation, so you can take your time deciding.
- Size and style
- Large picture windows and custom shapes cost more than standard sliders. Operating styles with more hardware also add to the price.
- Frame and glass choice
- Vinyl frames, low-E coatings and gas-filled glass each change the price. Our energy efficient windows page explains what each option does.
- Wall finish
- Stucco needs cutting and patching. Wood siding or trim usually goes faster.
- Condition of the opening
- Rot or out-of-square framing takes extra time to correct. We point it out at the estimate so it is not a surprise later.
- Access and permits
- Second-story windows need more setup. A permit adds a fee and an inspection visit.
Window installation questions
Something not covered here? (714) 577-2549
What is the difference between installation and replacement?
Replacement usually fits a new window into the existing frame. Installation here means a full new window set into the rough opening, with new flashing. We use installation when the frame is damaged or the opening is new.
Will you damage my stucco?
We cut only as much stucco as the job needs. After the window is set, we patch the edge so it blends in. Some color difference can show until it is painted, and we will tell you that up front.
Do I need a permit?
It depends on the work. New openings and some full-frame jobs need one. If yours does, we pull it and handle the inspection.
Can you install windows in my addition?
Yes. Once your builder frames the openings, we measure, order and install. We can look at the plans early so the sizes line up.
How long will I be without a window?
Usually just a few hours per opening. We take out and set one window at a time, so your home is closed up by the end of the day.

Let's look at your openings
We will come to your home, measure, and give you a written estimate with no pressure. We serve Buena Park and nearby towns like Cypress, La Palma and Fullerton.